Honda

CBR600RR

This bike is located at Vauxhall
21411_CBR600RR 21412_CBR600RR 21410_CBR600RR 21408_CBR600RR 19434_CBR600RR 19433_CBR600RR
Details
Type:Motorcycle
Model:CBR600RR
Year:n/a
Engine:600cc
Colour:Graphite Black, Tricolour (red, White And Blue), Repsol Colour
Price:CALL

Enquire About This Bike

Our Sales Team will give you a call or email to discuss further details about this bike.

Verification code

Introduction

The Honda CBR600RR represented a big step forward for the 600cc Supersport class when it was launched in 2003. Thanks to input from the MotoGP race bike of the time, the RC211V, the CBR600RR not only redefined performance parameters on the road with its flexible, yet high-revving engine and pin-sharp handling, it went on to win the FIM World Supersport Championship six years in a row.

In 2010 Honda also became the official engine supplier for the ultra-competitive Moto2 class, supplying a power unit based on that of the CBR600RR, testament to the engine’s potential and reliability. Constant development over the last decade has seen the CBR600RR evolve into one of the most polished packages ever produced in the Supersports arena. For 2013, the CBR600RR has once again progressed…

Model Overview

So two key factors drove development of the new CBR600RR: improved racetrack performance, combined with the ability to be ridden – and genuinely enjoyed – on a twisty road or city street by riders of all experience levels.

Focus was placed upon the chassis, with the goal being creation of a bike that offered control and handling far beyond its class. The CBR600RR’s new inverted Showa 41mm Big Piston Forks deliver an incredibly smooth ride on the road, while offering great connection to the front tyre when on the limit at the racetrack. Lightweight, 12-spoke cast aluminium wheels – similar to those on the CBR1000RR Fireblade – are also used, for greater feedback.

Its 599cc four-cylinder engine’s sophisticated PGM-DSFI fuel injection system – fed a large volume of air by the Direct Air Induction System – and its ECU have been re-mapped for improved throttle response and feel throughout the rev-range. The Intake Air Control Valve also now operates through all rpm ranges. These improvements make the bike easier to ride at ‘normal’ speed, with increased performance under sports or racetrack conditions.

The CBR600RR’s stunning and very clean new styling is a blend of Honda’s current RC213V MotoGP race bike, with aerodynamic lessons taken directly from the 2011 RC212V. Fittingly, for a motorcycle that shares DNA with one of the world’s ultimate race machines, a Repsol colour will now be available on the CBR600RR. Inspired by Honda’s 2012 MotoGP bike, this colourway is also available on the NSC50R, CBR250R and CBR1000RR for 2013.

Key Features

 Chassis

The CBR600RR’s front suspension was targeted as the main area from which to find improved levels of handling. Honda’s development engineers noted in testing that there has been a slight tendency (a result of improvements in both bike and tyre performance, plus much more efficient brakes) for the front suspension on recent Supersports bikes to dive quickly when the brakes are applied, a phenomenon which has a de-stabilising effect on control.

Improved damping function was key for the new CBR600RR, so a fully adjustable Showa Big Piston inverted front fork, with an exceptionally rigid 41mm diameter inner tube, has been used. Compared with the previous fork, the larger diameter piston results in a 3.5 times larger pressure-bearing area. This ensures that precise damping force is generated without delay from the initial phase, resulting in greater smoothness, a more comfortable ride, and greater stability when braking hard. Transient damping force characteristics are also improved. Riding on ordinary roads is more comfortable than before and when the bike is taken to the limit on the racetrack, there’s an improved sense of connection with the tarmac when braking. Adjusting the rebound and compression settings has been made easier by consolidating the functions for both on the upper part of the front fork.

The CBR600RR’s Unit Pro-Link rear suspension uses no shock top mount on the frame, and is a system unique to Honda. The shock mounts to the upper part of the swingarm and the lower link, effectively operating independently of swingarm movement. This stabilises behaviour under hard cornering and delivers superb traction and turning ability, plus improved shock absorption and much more consistent damping.

 

Continued development of the Unit Pro-Link system – refinement of the pressure-bearing surfaces in the piston and optimisation of valve rigidity – has resulted in much better low speed performance and greater feedback in the initial phase of operation, giving superb stability and controllability. The swingarm itself employs an “eye-shaped” cross-section and is manufactured using conventional cast aluminium for the pivot, pressed aluminium for the right-hand section and extruded aluminium tubing for the left-hand section. This has resulted in a lightweight component with an exquisite rigidity balance.

Receiving constant input from Honda’s race programme, the CBR600RR’s frame is constructed from twin tubes of diecast aluminium. A mass-centralisation process for the new model has resulted in the sections that are furthest away from the bike’s centre of gravity being made lighter. This has made for more agile handling and sharper responsiveness and has taken turning ability and cornering speed up to the next level. Rake is set at 23° with trail of 96.3mm; wheelbase is 1,375mm and kerb weight 196kg (with electronic Combined ABS).

Both lightweight cast aluminium wheels feature the same 12-spoke design used on the CBR1000RR. The load from braking, acceleration and cornering comes in many directions, and increasing the number of spokes spreads forces more evenly; combined with the Showa Big Piston Fork’s improved road-adherence, the rider has a much greater sense of control, and feel, for front tyre grip.

As standard the CBR600RR’s powerful braking setup uses the well-proven setup of twin 310mm discs with radially mounted opposed-piston four-pot calipers, and a lightweight single-piston caliper and 220mm disc at the rear. Sintered pads all round deliver effective power with linear control, and the radial mounts (the bolts securing the caliper are oriented forwards, not toward the axle) ensure much greater rigidity and even pressure across the whole pad. Greater braking efficiency and control is helped by use of a radial front brake master cylinder.

The CBR600RR has HESD (Honda Electronic Steering Damper) with optimal damping force constantly maintained by the ECU. Speed and throttle aperture status are detected by sensors and data sent to the ECU; at low speed the ECU fully opens the main valve inside the damper to reduce damping and make the handling lighter. When the bike is travelling at high speeds or accelerating the ECU closes the main valve increasing damping, to control interference from the road surface.

The styling of the new CBR600RR has a functional beauty that mirrors that of the race machine that inspired it – Honda’s RC213V. The sleek, flowing fairing houses twin line-beam headlights; they’re embedded deep within it, to concentrate mass, and also help direct airflow to the ram-air duct. The screen, as on the RC213V is small and the tail unit mirrors that of the MotoGP machine. The fuel tank cover is shaped to allow the rider to move freely and grip it with arms and knees.

Its aerodynamic package also draws heavily on Honda’s MotoGP machines. The result is 6.5% less drag than the previous model in a normal riding position, and 5% less when prone. The ability of the rider to redirect the road-ready CBR600RR while cornering is unmatched; these aerodynamic developments were looped back to the MotoGP engineers, showing how close the relationship between track and road is.

Engine

The CBR600RR’s extremely compact 599cc, liquid cooled DOHC 16-valve inline four-cylinder power plant makes a great contribution to the bike’s superb handling. Featuring a compression ratio of 12.2:1, it produces 88kW @ 13,500rpm, with torque of 66Nm @ 11,250rpm. In this stage of the engine’s development improved power and torque were not the focus; instead, throttle response and feel across the entire rev-range were targeted.

The DAIS (Direct Air Induction System) smoothly channels a large volume of air directly through the intake situated in the middle of the front fairing (the area subjected to the greatest air pressure) and into the airbox via the steering head duct. The large polypropylene and fibreglass intake port extension that bridges the gap between the steering head and the engine also supports the front fairing and headlights, saving weight. Intake noise has been reduced by 3dB overall, without losing the satisfying howl familiar to CBR600RR riders.

New ECU mapping upgrades the PGM-DSFI (Programmed Dual Sequential Fuel Injection System) to optimise power and torque output characteristics. The PGM-DSFI also controls the large volume of air that enters the DAIS air duct and the fuel injected by the injectors, supplying the optimal mix across all rpm ranges.

Embedded in the ECU is a map designed to achieve optimal combustion in ordinary rpm ranges. There are two injectors to each cylinder; up to a certain level of rpm only the lower injector operates, but when the throttle is more than 25% open and the engine’s operating at more than 4,800rpm, the upper injector comes into play. Efficient combustion and a razor-sharp throttle response is the result.

The IACV (Intake Air Control Valve) attached to the throttle has a new control map. Designed originally to stabilise rpm when idling and improve starting characteristics, its function has been expanded to cover all rpm ranges. The IACV aperture is finely controlled in accordance with rpm and optimises air intake volumes when the throttle is slightly open. It also improves combustion ratios in the high-rpm and low-load ranges. As a result stable combustion is maintained when decelerating or when accelerating after decelerating.

Furthermore, the combined effect of the ECU programs, plus the air injection system and large capacity catalyser is to deliver a strong environmental performance.

Electronic Combined ABS

In June 2008, Honda announced the world’s first “electronic Combined ABS” for production motorcycles, available on both the CBR600RR and CBR1000RR Fireblade in 2009. It remains unique, and has been used and further developed through two high profile racing series: the IDM German national championship (won in 2010 by Karl Muggeridge on an electronic Combined ABS equipped CBR1000RR), and the World Endurance Championship (in which electronic Combined ABS was used for the last two races of 2011, and throughout the 2012 season).

The system works as follows: input from the brake lever is recognised by a series of pressure sensors which are connected to an ECU.  The ECU assesses front and rear wheel speed and, using this information, translates the lever pressure to power units which operate the front and rear brakes. Hydraulic pressure is then applied by these power units to the brake calipers, delivering the optimal braking force for every situation without locking.

All the expected ABS and CBS functions are provided – the prevention of wheel lock and the distribution of braking force between front and rear brakes – but the ultra-fine precise control of the “brake-by-wire” system means that vehicle vibration and pitching are minimized, so that the bike remains in a normal, neutral position under braking. Brake “pulse” is also eliminated, and, overall, sport riding performance is uninterrupted – cornering feel remains the same and controllability is enhanced.

SPECIFICATIONS

Engine

Fuel Tank Capacity 18.1L
Carburation PGM-DSFI electronic fuel injection
ACG Output 360W
Engine Displacement 599cc
Battery Capacity 12V/8.6AH
Max. Torque 66Nm/11,250rpm
Fuel Consumption 20.0km/l (56.5mpg) (WMTC mode*)
Compression Ratio 12.2: 1
Starter Electric
Bore & Stroke 67 x 42.5mm
Oil Capacity 3.5L
Max. Power Output 88kW/13,500rpm
Engine Type Liquid-cooled 4-stroke 16-valve DOHC inline-4

 

Transmission

Clutch Wet, multiplate with coil springs
Final Drive O-ring sealed chain
Transmission Type 6-speed

Wheels, Suspension and Brakes

Rim Size Rear 17M/C x MT5.5
Suspension Rear Unit Pro-Link with gas-charged remote reservoir damper, adjustable spring preload and compression and rebound damping, 130mm axle travel
Wheels Rear Hollow section 12 spoke cast aluminium
Wheels Front Hollow section 12 spoke cast aluminium
Brakes Rear 220 x 5mm hydraulic disc with single-piston caliper and sintered metal pads
Tyres Front 120/70 -ZR17M/C (58W)
Suspension Front 41mm fully adjustable inverted Showa Big Piston Fork, 120mm axle travel
Brakes Front 310 x 4.5mm dual hydraulic disc with radial-mount 4-piston calipers, floating rotors and sintered metal pads
Tyres Rear 180/55 -ZR17M/C (58W)
Rim Size Front 17M/C x MT3.5

Dimensions and Weight

Seat Height 823mm
Wheelbase 1,373mm
Kerb Weight 196kg (ABS)
Trail 96.3mm
Dimensions (L×W×H) 2,029 x 684 x 1,115mm
Ground Clearance 137mm
Headlights 12V, 55W x 2 (low)/55W x 1 (high)
Caster Angle 23° 45′
Frame type Diamond; Fine Die-Cast aluminium

All specifications are provisional and subject to change without notice.

# Please note that the figures provided are results obtained by Honda under standardised testing conditions prescribed by WMTC. Tests are conducted on a rolling road using a standard version of the vehicle with only one rider and no additional optional equipment. Actual fuel consumption may vary depending on how you ride, how you maintain your vehicle, weather, road conditions, tire pressure, installation of accessories, cargo, rider and passenger weight, and other factors.

 

Cookie Policy

This site uses cookies. Cookies are harmless, and are essential for most sites.